Linux 常用运维脚本，建议收藏

同步本机时间

ntpdate 210.72.145.44

清除系统缓存，空出更多内存

free && sync && echo 3 > /proc/sys/vm/drop_caches && free

杀掉僵尸进程

kill $(ps -A -ostat,ppid | awk '/[zZ]/ && !a[$2]++ {print $2}')

显示全部arp解析

tcpdump 'arp' -e -i eth0 -n -p -t |grep is-ateth0对应要换成你的显步名称

监看本机网卡端口情况

tcpdump -n -vv tcp port $1 -i em1em1为对应的网卡名称。

检查本机连接数

netstat -nat |awk '{print $6}'|sort|uniq -c|sort -nr

查看Tomcat日志中的异常

tail -F
/var/log/tomcat8/catalina.out |grep -E 'Exception|at' |grep -v WARN这里tomcat8要对应成你的相应版本

删除5天以前的tomcat日志

sudo find /var/lib/tomcat8/logs/ -mtime +5 -exec rm {} ;

清空 memcache 缓存

以下存成脚本，

#!/bin/sh
#实现通过主机名，端口清相应的memcache缓存 

if(($#<2));then
    echo "usage:$0 host port";
    exit 1;
fi
#如果参数缺失，退出程序，返回状态1

exec 6<>/dev/tcp/$1/$2 2>/dev/null;
#打开host的port 可读写的socket连接，与文件描述符6连接

if(($?!=0));then
    echo "open $1 $2 error!";
    exit 1;
fi
#如果打开失败，$?返回不为0，终止程序

echo -e "flush_all">&6;
echo -e "quit">&6;
#将HEAD 信息，发送给socket连接

cat<&6;
#从socket读取返回信息，显示为标准输出

exec 6<&-;
exec 6>&-;
#关闭socket的输入，输出

exit 0;

修改VirtualBox虚拟机的内存分配

保存脚本，第一个参数为虚拟机的名称，第二个为内存大小，如2G

#!/bin/bash
VM=$1
VBoxManage controlvm $VM poweroff
VBoxManage modifyvm $VM  --memory $2
VBoxManage startvm $VM --type headless

为VirtualBox 虚拟机加磁盘

#!/bin/sh

#machine=phptest
machine=$1

VBoxManage controlvm "$machine" poweroff

disk=/home/xwx/VirtualBox VMs/$machine/${machine}_swap.vdi

#VBoxManage createhd --filename "$disk" --size 1024

#VBoxManage storageattach "$machine" --storagectl "IDE" --port 1 --type hdd --medium $disk
#VBoxManage storageattach "$machine" --storagectl SATA --port 1 --type hdd --medium $disk
VBoxManage storageattach "$machine" --storagectl "SATA 控制器" --port 1 --type hdd --medium "$disk"

修改克隆虚拟机的ip地址

虚拟机克隆之前，第一次启动时需要修改ip才能远程控制：

#!/bin/bash
# set modify
ip=/etc/network/interfaces
hn=/etc/hostname
netmask=255.255.255.0
network=192.168.20.0
broadcast=192.168.20.255
gateway=192.168.20.1
# mod ip、mask、gw、DNS、hostname
cp $ip /etc/network/interfaces.bak
sed -ri 's/(iface eth0 inet).*/iface eth0 inet static/' /etc/network/interfaces
echo "Please input IP:"
read ipadd
   if [ -n "$ipadd" ]; then
     echo "address $ipadd" >> $ip
     echo "Modify Completed "
   else
     echo "Not Modified"
   fi
echo "netmask $netmask" >> $ip
echo "Netmask Modify Completed "
echo "network $network" >> $ip
echo "Network Modify Completed "
echo "broadcast $broadcast" >> $ip
echo "Broadcast Modify Completed "
echo "gateway $gateway" >> $ip
echo "Gateway Modify Completed "
echo "Please input hostname:"
read hostname
if [ -n "$hostname" ]; then
   echo "$hostname" > $hn
   echo "Modify Completed "
else
   echo "Default Hostname"
fi
echo "All modification completion"
read -n1 -p "Whether restart network [Y/N]?"
case $REPLY in
Y|y) echo
       /etc/init.d/networking restart;;
N|n) echo
       echo "Network needs to restart to take effect!!!!!!";;
esac
exit

实时统计Nginx日志

使用goaccess软件，可能用apt install goaccess或yum install goaccess安装。

sudo goaccess /var/log/nginx/access.log --log-format='%h %^[%d:%t %^] "%r" %s %b "%R" "%u" "-" "%v"' --date-format='%d/%b/%Y' --time-format='%H:%M:%S'

备份nginx配置文件

nginx会频繁修改，改之前最好备份一下：

###################################################################
#######MySQLdump###################################################
#!/bin/sh
# -----------------------------
# the directory for story your backup file.
backup_dir="/home/your/backup"

# date format for backup file (dd-mm-yyyy)
time="$(date +"%Y%m%d")"

MKDIR="$(which mkdir)"
RM="$(which rm)"
MV="$(which mv)"
TAR="$(which tar)"
GZIP="$(which gzip)"

#针对不同系统，如果环境变量都有。可以去掉

# check the directory for store backup is writeable
test ! -w $backup_dir && echo "Error: $backup_dir is un-writeable." && exit 0

# the directory for story the newest backup
test ! -d "$backup_dir" && $MKDIR "$backup_dir"


$TAR -zcPf $backup_dir/$HOSTNAME.nginx.$time.tar.gz  /etc/nginx
$TAR -zcPf $backup_dir/$HOSTNAME.cron_daily.$time.tar.gz  /etc/cron.daily

#delete the oldest backup 30 days ago
find $backup_dir -name "*.gz" -mtime +30 |xargs rm -rf

exit 0;

nginx 自动筛选出访问量过大的ip进行屏避

#!/bin/bash
nginx_home=/etc/nginx
log_path=/var/log/nginx
tail -n10000 $log_path/access.log 
      |awk '{print $1,$12}' 
      |grep -i -v -E "google|yahoo|baidu|msnbot|FeedSky|sogou" 
      | grep -v '223.223.198.231' 
      |awk '{print $1}'|sort|uniq -c|sort -rn 
      |awk '{if($1>50)print "deny "$2";"}' >>./blockips.conf

sort ./blockips.conf |uniq -u  >./blockips_new.conf
mv ./blockips.conf ./blockips_old.conf
mv ./blockips_new.conf ./blockips.conf
cat ./blockips.conf
#service nginx  reload

监控各网站首页

#!/bin/sh

RED='33[0;31m'
GREEN='33[0;32m'
NC='33[0m' # No Color


function test_domain {
        local domain=$1
        status=`curl -s -o /dev/null -I -w "%{http_code}" $domain`

        if [ $status -eq '404' ]
        then
          printf "${domain}${RED}  ${status}${NC}n"
        else
          printf "$domain$GREEN  $status$NCn"
        fi

}


domain_list=$'bixuebihui.cnnwww.bixuebihui.cnndev.bixuebihui.cnnblog.bixuebihui.cnnbixuebihui.comnwww.bixuebihui.com'

while read -r domain; do
#       echo "... $domain ..."
   test_domain "http://$domain"
   test_domain "https://$domain"

done <<< "$domain_list"

从mysql日志里过滤慢sql

#!/usr/bin/perl
#
# Nathanial Hendler
# http://retards.org/
#
# 2001-06-26 v1.0
#
# This perl script parses a MySQL slow_queries log file
# ignoring all queries less than $min_time and prints
# out how many times a query was greater than $min_time
# with the seconds it took each time to run.  The queries
# are sorted by number of times it took; the most often
# query Appearing at the bottom of the output.
#
# Usage: mysql_slow_log_parser logfile
#
# ------------------------
# SOMETHING TO THINK ABOUT (aka: how to read output)
# ------------------------
#
# Also, it does to regex substitutions to normalize
# the queries...
#
#   $query_string =~ s/d+/XXX/g;
#   $query_string =~ s/(['"]).+?(['"])/$1XXX$2/g;
#
# These replace numbers with XXX and strings found in
# quotes with XXX so that the same select statement
# with different WHERE clauses will be considered
# as the same query.
#
# so these...
#
#   SELECT * FROM offices WHERE office_id = 3;
#   SELECT * FROM offices WHERE office_id = 19;
#
# become...
#
#   SELECT * FROM offices WHERE office_id = XXX;
#
#
# And these...
#
#   SELECT * FROM photos WHERE camera_model LIKE 'Nikon%';
#   SELECT * FROM photos WHERE camera_model LIKE '%Olympus';
#
# become...
#
#   SELECT * FROM photos WHERE camera_model LIKE 'XXX';
#
#
# ---------------------
# THIS MAY BE IMPORTANT (aka: Probably Not)
# ---------------------
#
# *SO* if you use numbers in your table names, or column
# names, you might get some oddities, but I doubt it.
# I mean, how different should the following queries be
# considered?
#
#   SELECT car1 FROM autos_10;
#   SELECT car54 FROM autos_11;
#
# I don't think so.
#


$min_time       = 0;    # Skip queries less than $min_time
$min_rows       = 0;
$max_display    = 10;   # Truncate display if more than $max_display occurances of a query

print "n Starting... n";

$query_string   = '';
$time           = 0;
$new_sql        = 0;


##############################################
# Loop Through The Logfile
##############################################

while (<>) {

        # Skip Bogus Lines

        next if ( m|/.*mysqld, Version:.+ started with:| );
        next if ( m|Tcp port: d+  Unix socket: .*mysql.sock| );
        next if ( m|Times+Ids+Commands+Argument| );
        next if ( m|administrators+command:| );


        # print $_;
        # if ( /Query_time:s+(.*)s+Lock_time:s+(.*)s/ ) {
        #if ( /Query_time:s+(.*)s+Lock_time:s+(.*)s+Rows_examined:s+(d+)/ ) {
        if ( /Query_time:s+(.*)s+Lock_time:s+(.*)s+Rows_examined:s+(.*)/ ) {

                $time    = $1;
                $rows    = $3;
                $new_sql = 1;
                # print "found $1 $3n";
                next;

        }


        if ( /^#/ && $query_string ) {

                        if (($time > $min_time) && ($rows >= $min_rows)) {
                                $orig_query = $query_string;

                                $query_string =~ s/d+/XXX/g;
                                $query_string =~ s/'([^'\]*(\.[^'\]*)*)'/'XXX'/g;
                                $query_string =~ s/"([^"\]*(\.[^"\]*)*)"/"XXX"/g;
                                #$query_string =~ s/(['"]).+?(['"])/$1XXX$2/g;
                                #$query_string =~ s/s+/ /g;
                                #$query_string =~ s/n+/n/g;

                                push @{$queries{$query_string}}, $time;
                                push @{$queries_rows{$query_string}}, $rows;
                                $queries_tot{$query_string} += $time;
                                $queries_orig{$query_string} = $orig_query;
                                $query_string = '';

                        }

        } else {

                if ($new_sql) {
                        $query_string = $_;
                        $new_sql = 0;
                } else {
                        $query_string .= $_;
                }
        }

}


##############################################
# Display Output
##############################################

foreach my $query ( sort { $queries_tot{$b} <=> $queries_tot{$a} } keys %queries_tot )  {
        my $total = 0;
        my $cnt = 0;
        my @seconds = sort { $a <=> $b } @{$queries{$query}};
        my @rows    = sort { $a <=> $b } @{$queries_rows{$query}};
        ($total+=$_) for @seconds;
        ($cnt++) for @seconds;

        print "### " . @{$queries{$query}} . " Quer" . ((@{$queries{$query}} > 1)?"ies ":"y ") . "n";
        print "### Total time: " . $total .", Average time: ".($total/$cnt)."n";
        print "### Taking ";
        print @seconds > $max_display ? "$seconds[0] to $seconds[-1]" : sec_joiner(@seconds);
        print " seconds to completen";
        print "### Rows analyzed ";
        print @rows > $max_display ? "$rows[0] - $rows[-1]": sec_joiner(@rows);
        print "n";

        print "$queryn";
        print $queries_orig{$query}."nn";
}


sub sec_joiner {
        my ($seconds) = @_;
        $string = join(", ", @{$seconds});
        $string =~ s/, (d+)$/ and $1/;
        return $string;
}

exit(0);

本机路由表

ip route add 5.6.13.192/26 dev em1 src 5.6.13.218 table 10
ip route add default via 5.6.13.254 table 10
ip route add 5.6.13.192/26 dev em2 src 5.6.13.217 table 20
ip route add default via 5.6.13.254 table 20
ip route add 5.6.13.192/26 dev em1 src 5.6.13.218
ip route add 5.6.13.192/26 dev em2 src 5.6.13.217
ip route add default via 5.6.13.254
ip rule add from 5.6.13.218 table 10
ip rule add from 5.6.13.217 table 20
ip route flush cache

出现异常时，用钉钉dingtalk报警

#!/bin/Python
# -*- coding: utf-8 -*-

from flask import Flask
from flask import request
import json
import requests

app = Flask(__name__)

def transform(text):
    textMap = json.loads(text)

    nodePorturl = 'http://192.168.10.182:3672'
    externalURL = textMap['externalURL']
    print(externalURL)
    links =[]
    for alert in textMap['alerts']:
        print('-------------')
        time = alert['startsAt'] + ' -- ' + alert['endsAt']
        generatorURL = alert['generatorURL'];
        generatorURL = nodePorturl+generatorURL[generatorURL.index('graph'):]
        summary = alert['annotations']['summary']
        description = alert['annotations']['description']
        status = alert['status']
        title = alert['labels']['alertname']
        link = {}
        link['title'] = title
        link['text'] = status + ': ' + description
        link['messageUrl'] = generatorURL
        link['picUrl'] = ''
        links.append(link)
    return links

@app.route('/',methods=['POST'])
def send():
    if request.method == 'POST':
        post_data = request.get_data()
        alert_data(post_data)
    return "hello"

def alert_data(data):
    url = 'https://oapi.dingtalk.com/robot/send?access_token=YOUR_TOKEN'
    headers = {'Content-Type': 'application/json'}
    for link in transform(data):
        send_data = {"msgtype": "link", "link": link}
        print(send_data)
        r = requests.post(url, data=json.dumps(send_data), headers=headers)

if __name__ == '__main__':
    app.run(host='0.0.0.0', port=1111)